Sharpening Images and the Unsharp Mask

One of the most often used and abused post processing tools are the sharpen filters. When applied properly, sharpening can boost the image by making it look crisper and more defined. However, there is a tendency to go overboard with this and the image can come out looking unnatural and ‘oversharpened.’ There is the popular misconception that if you sharpen a blurry image, it will magically appear clearer. What does happen is that the blurry image will just look more terrible. 

Sharpening works by exaggerating the contrast of the object’s edges, giving the viewer the impression of distinct delineation. There are many ways to do this. You can sharpen the entire image in one click with the Sharpen filter or you can use the Unsharp Mask for more control over how defined you want the sharpening to be. Some people prefer to use the High Pass Filter or the Smart Sharpen. Whichever method you use, just remember to be light-handed when sharpening since too much can make the image look unnatural with distorted pixels. One tip would be to sharpen only certain areas in the shot instead of the whole image. For example, if your image is of a bird flying against the cloudy sky, sharpen only parts of the bird while leaving the sky untouched to keep it looking smooth. 

An image edited with a simple Sharpen filter:

sharpcomp Sharpening Images and the Unsharp MaskWhen editing your image, always leave sharpening for last. Sharpening in the middle of editing is not advisable especially if the image might be resized later on. For full effect, do it when you have settled on the final size of your image. If you’re planning to sell your shots in a stock site, try not to sharpen your images at all. The buyers of your image might want to resize the shot and if there is obvious sharpening, they might be turned off from buying the image. Microstock sites have reviewers who peruse every single image that is submitted for possible photographic defects. They are very particular with photos that look too sharpened and I have had shots rejected because of oversharpening even though I hadn’t sharpened them at all.  

Sharpening might not make blurry images clearer but it can make images with soft edges appear better defined, and this can make a world of difference in your shot.

Let us use one sharpening tool and see how it works:

The Unsharp Mask is a quick process to emphasize the acutance (edge contrast) of details and it is controlled by three settings:

Radius – this defines the section to be sharpened. If you choose a low radius, only the pixels close to the edge will be sharpened and if you use a high radius, the larger the affected area. If you start seeing unsightly halos around the edges, it means you’re setting the radius value too high and is an indication to decrease the radius value. 

Amount – The edges of details have a lighter and a darker side and this setting controls how much contrast is applied. The light areas become lighter and the dark parts become darker when you increase the percentage amount.

Threshold – this limits the amount of sharpening that is applied to the image by determining how close pixels should be in order to be considered as edge pixels.  If there is little difference between pixels in a certain area, such as skin tones or an empty sky, then the threshold can be set to leave these areas from being sharpened. 

The settings to be used vary with each shot. Image size plays a big part in this case. For an image with a small print size, you would not need to increase the settings by a big margin before the result quickly becomes apparent.  The bigger the image size, the more you can increase the setting values. 

Step 1:

For this tutorial, Adobe Photoshop CS2 is used. Open a copy of your original image and create a duplicate layer. A keyboard shortcut to create a layer is Ctrl + J for Windows and Command + J for Mac.

Step 2:

beeselect Sharpening Images and the Unsharp Mask

 

 

Make a selection using the Lasso tool. Choose only the areas that need sharpening and leave the rest of the image untouched. In this example, only the bee’s wings, antennae, upper part of the body and the edge of the leaf were selected.

 Step 3:

 beesmartsharp Sharpening Images and the Unsharp Mask

Open the Unsharp Mask dialog box under Filter>Sharpen>Unsharp Mask. The box shows a preview of a selected area, the three settings and the preview checkbox. If you check this, you will also get to see a preview of how your adjustments will affect the image in the main screen.

If it is your first time to use the settings, you can experiment first with how they work. Try dragging each slider one at a time to the opposite side of the bar and, although the effect will be exaggerated, you will have a good idea of how each one will affect the image.

Since the Radius setting is the most essential of the three, you can start with that and then adjust the Amount and then the Threshold. Once you are satisfied with the adjustments of the three settings, the outcome should be an image that is more defined than the original, yet with the appropriate areas kept smooth and unaffected. The result most likely will be subtle but still apparent, especially when compared to the original such as in this side by side comparison:

beeunsharp Sharpening Images and the Unsharp Mask

What happens if you go overboard with the Unsharp Mask? Unattractive and obvious effects begin to happen. If your radius value is set too high, halo artifacts begin to appear. These are very light and bright outlines near the edges of details. Jagged edges and pixelation might also occur along the edges. There is more visible noise and graininess which is most evident if you oversharpen sections with no edges. This is the reason why none-edged areas are too be avoided when sharpening. 

beeoversharp Sharpening Images and the Unsharp Mask


Share |

Submit a Photography Article!

Posted in Articles, Beginner Tutorials, Photography Tutorials, Photoshop Tutorials
Tags: , , ,

1 Comment »
Print This Post Email This Post
Permalink | Posted in Articles, Beginner Tutorials, Photography Tutorials, Photoshop Tutorials
Tips on How to Turn Abstract Concepts to Effective Stock Images

The stock image industry is filled to the brim with all kinds of images that cater to a global market. The intent is to cover the customers’ image needs. A lot of these are for straightforward images such as product shots but there is also a huge market for images that present an abstract concept, such as a visual representation of the concept of ‘business’ or ‘health’.  Oftentimes, these kinds of shots are harder to capture since you are trying to transform an idea into something more concrete, which is the image. The following are three popular abstract concepts with helpful tips on how you can create stock photos that represent them:

concept1 Tips on How to Turn Abstract Concepts to Effective Stock Images1. Love – put your own spin to cliché images that show the concept of love such as people hugging or kissing, red paper hearts, heart balloons, chocolate hearts and the like. Although your image may be perfectly exposed and composed, it could get buried under the thousands of similar images from other good photographers. Instead of a young couple kissing, why not make it an old couple instead. Instead of composing some chocolate hearts on a white background, why not have someone about to eat the chocolate heart instead. By going a step further, you are separating yourself from the pack. Keep in mind that the concept of ‘love’ has many levels, such as ‘familial love’ and ‘romantic love’. Try to compose shots which portray various kinds of love.  Examples of images that convey ‘love’ are a father holding his baby, a child and her pet, and a mother hugging her elderly parent.

concept2 Tips on How to Turn Abstract Concepts to Effective Stock Images2. Health and Fitness – nowadays, people of all ages are very health conscious and there are millions of products and services that offer the concept of a healthy lifestyle. The concept of good health is dear to our hearts and images that convey this are widely popular. When creating a shot, first imagine what you would consider as promoting health and fitness. Common topics would be diet and exercise so the next step is to use a subject or shoot a scene that shows this. People jogging, vitamin pills, gym equipment, and healthy looking people exercising are some examples. Again, the trick is to avoid shots similar to what others are offering. Play with your camera angle, the framing, the depth of field, etc. to further push your concept.

concept3 Tips on How to Turn Abstract Concepts to Effective Stock Images3. Work/Business – the most common stock images that show the concept of business are people in business attire, briefcases, office desks and handshakes.  There is nothing wrong with having a good quality stock image that shows any of these examples but you must remember that the competition has similar images of their own. To add your own creative touch, why not make use of workers that are less noticed and who normally do not wear business suits to work such as fishermen or construction workers.

Whatever concept you are trying to present, always keep in mind that these are for stock and as such, need to have commercial and resale value. Customers should be able to use them to promote their own products and services. Also the idea should be immediately clear to the customers and not make them wonder what is the message you are trying to get across.


Share |

Submit a Photography Article!

Posted in Articles, Blog, Miscellaneous, Photo Inspiration, Photography Genre, Stock Photography
Tags: , ,

No Comments »
Print This Post Email This Post
Permalink | Posted in Articles, Blog, Miscellaneous, Photo Inspiration, Photography Genre, Stock Photography